thank you so much. I’ve tried every thing cleaned it right down and checked for a blocked pipes etc and still cannot get it too work.. Only 9 left in stock - order soon. If the brush bar is spinning, you can fix the problem and continue cleaning. If your brushbar is still not working after you have followed these steps, contact the manufacturer for more assistance. There is a switch on your Sharp – on mine it is on the front of the top handle – which is used to switch between HARD FLOOR mode and CARPET mode.

You look at your vacuum and find that you have sucked a stray sock into the machine and now the brushes stop spinning.

Check whether the vacuum is converted to the proper mode. Now, its indicator light has to be green.

The brush roll isn’t mostly spinning because of lots of hair that string around the brush causing build-up. Do not overlook the tassels on rugs or curtains as they can be problematic. Genuine Shark Pet Hair Power Brush Tool Attachment For UV440 DLX Lift Away NV352 NV356E NV22L UV420 UV410.

The model Az1000 Series couldn’t find the word reset, but I pressed the roller cover down until it snapped in place. I was about to drive to costco to return. Shark vacuum brush roll indicator light not on.

Therefore, they prevent the brush roll from rotating. We’ll walk you through the most effective way to deal with this situation.

Therefore, it’s a good idea to clean it out after each use. Whenever I push lever to clean hard floors , the rotator brush stops turning. Roller spins so nothing stopping it If it is spinning, the problem has been solved and you can continue your cleaning. Even if you already check all the issues above, the brush rill still doesn’t work, you need to call a technician.

More importantly, you have to unplug the vacuum before doing this.

Nowadays, one of the most popular vacuum cleaners on the market is the Shark vacuum cleaner.

You can access the brush roll with ease.

Therefore, it can prevent power from reaching the vacuum as well as brush roll.

The roller brush will not spin in that mode. We will share with you the troubleshooting you need to know when the brush of your Shark is not spinning. He can know how to help you.

You are a genius.

Now, you have all plugged in and the power switch is in the position of the brush roll “II”.

The roller brush should spin and the WHITE light should come on. Additionally, Bestsharkvacuums.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

The next step to make the shark rotator brush roll work is to inspect the brush roll for clogs or debris.

However, the vacuum can’t work even when it is just worn out. Push the grey button on the back panel to open up the brush head. Be patient and first of all disconnect the machine from the power outlet.

After checking all the solutions above, you still notice the brush isn’t spinning, you need to take a look at the belt. This means that you do not have to change the belts but simply reset it. If it still doesn’t work, you have to r… Your brush rotator brush roll cannot work after you have followed these steps. Examine the situation and if there is something stuck inside, carefully lift the offending item out. The vacuum comes with a belt. Traditional upright vacuums and backpack vacuums are equipped with a replaceable drive belt that you need to check and replace.